check your oil on the dipstick. if you have a cracked head or blown head gaskets the oil on your dipstick might have bubbles on it from water getting into your oil. another sign is white smoke coming from your tailpipe meaning you are burning water. I don't think you can over heat your oil, if your oil got too hot it would burn and you would smell it.
bad vacuum hoses or leaking intake manifold gaskets.
Are you sure it is the water pump gaskets. It could be leaking some somewhere else, like the lower intake gasket
From 1996 to late 1999 There was a problem with the intake gasket design on the Vortec engines. They have sents redesigned the gasket and now it does not leak as often. Intake Gaskets leaking is a common problem. Now the only time you have a problem with the heads is when the engine is over heated, and I mean HOT. Then the heads warp and the head gaskets leak or blow. Chevy just don't have problems with the heads on the V6 and V8 engines.
Remove carburator then intake manifold then cylinder heads
If the oil is leaking from the front seal you will need to remove the oil pan and replace both the front and rear seals and the rail gaskets.
Yes, the distributor has to come out to remove the intake manifold in order to remove the heads.
Can be leaking intake manifold gaskets, which can sometimes be fixed by using Dexcool coolant. Can also be a head gasket.
We have had several 4.3L engines at work develop coolant leaks from the intake manifold gaskets failing.
YES, Remove all old gaskets and replace with the NEW ones.
Look for an intake manifold leaking at a cracked or disconnected hose or one of the gaskets to the cylinder head or throttle body.
Remove the inside door panel from your 2003 Chevy Silverado pickup truck. Remove the wiring harness from your heated side mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.
Remove the cylinder head from your 1992 Chevy 350 cubic inch engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.