0
Using a remote control similar to those ones used to turn on electronic devices. The infrared rays can switch the light bulb on, since it has a small transistorised circuit that can actuate a tiny relay to put the light bulb in series with the electric circuit.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you make a light bulb light up using a d cell battery?
no it will bloww
What is the conclusion for a battery powered light bulb?
what is a conclusion for a battery powered light bulb
How do you connect the parts of a simple electric circuit together so that the light bulb lights up?
Simply connect the -ve of the bulb to -ve of the battery and +ve of bulb to +ve of battery using an electrically conductive wire, the bulb will light automatically.
How do you light a bulb using only a battery?
Uhh... You need AT LEAST one wire other wise its impossible. You would need a custom shaped battery to do it without even one wire...
Can a car battery light up a 60 watt regular light bulb with out using a power inverter?
Yes it it is a 12 volt DC light bulb. It will not operate a household 120 volt light bulb.
How do you make a light bulb light up using a 1.5 volt battery?
If it is a 1.5 volt bulb you can connect it through a series circuit directly to your battery. If the bulb is not made to run on 1.5 volts and needs another voltage, it may not light up!
How do you light a light bulb without a light socket?
Take a lightbulb so the bottom touches on end of a battery. Take a wire and touch the battery and the other end to the lightbulb.
What is the controlled variable for a light bulb and battery?
A light bulb and a battery simply being is not an experiment, so there is no variable at all.
Can i light a light bulb with a battery and a paper clip?
Yes, if your battery has the capacity to match the light bulbs requirements. A 1.5volt "AA" battery cannot supply enough power to light a 60watt bulb. A flashlight that uses a single battery will have a bulb small enough to be powered by a small battery and a paper-clip as a conductor. A low voltage LED may also be used. Touch one end of the battery to one terminal on the bulb, and connect the other end of the battery to the other terminal using the clip. (you may find it helpful to use tape to hold it all together)
What components do you need to make a simple series light bulb?
You need a Battery, Light Bulb, Ammeter, Switch.
Do you have a diagram on 9volt battery and light bulb?
Draw a battery and light bulb. Draw a line from the smaller connector on the battery to the bottom of the light bulb, this is positive on both. Draw a line from the bigger connector on the battery to the side of the light bulb,'this is the negative of both. Looked all over and can't seem to find this one.
If you connect a battery and a bulb in this way the bulb will not light?
yes
