0
There's a bolt you need to loosen by the AC pump to loosen/remove the belt.
Check www.mx-3.com there's an online manual available.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you repair j30 infiniti 94 ac belt?
You can't repair a belt, you need to replace it. Loosen the power steering pump first and remove that belt. Then you can loosen the AC belt at the Idler pulley.
How do you change out ac belt for 2001 Tahoe?
The ac belt has a tensioner that is accessed from below, and takes a tensioner tool to loosen. Remove the serpentine belt, release tension on the ac belt then the belt can come off for replacement.
How do you replace the serpentine belt for a 1993 Mazda Protege?
you have to loosen a bolt on the front of the AC compressor, I think its a 12mm. You loosen it and the the AC compressor will then be able to rotate downward, sometimes the compressor gets stuck with age and you might need to tap it down with a mallet. Once the compressor rotates downward the tension in the belt will be gone and you can change the belt. Then tighten the same bolt until you achieve the desired tension
How do you change a serpentine belt on a 98 Dakota 4x4 with AC?
buy a belt, loosen the tensioner, replace belt
How do you change the alternator belt on a Mazda 323?
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
How do you install the AC belt on a 94 Toyota Corolla dx?
There is a small idler pulley that also serves as the ac belt tensioner. Loosen the 14mm nut on that pulley then right behind that pulley is a 14mm bolt. Turn that bolt counterclockwise to loosen belt enough to remove the belt. But before you can do any of this you will have to move 2 other belts in order to fully remove ac belt and replace it.
Where is the belt to loosen on hydundai accent to replace ac belt?
The belt on a Hyundai Accent which must be loosened to replace the AC belt is located around the air conditioning compressor. It can be found at the front of the engine, near the bottom.
How do you change a AC belt on 90 Acura?
You need to loosen the belt tensioner. There is a large bolt that needs to be loosened in the center of the tensioner pulley. Then the small vertical bolt is turned in the direction to loosen the belt. After the tensioner is loose replace the belt and retension it.
How do you adjust AC belt on 93 Nissan pickup with 2.4 liter?
remove bottom skid plate and find ac belt and find ac belt tensioner and loosen center bolt and screw in long bolt to tighten,then tighten lock nut.
How do you change a drive belt and alternator belt on a 1992 Mazda Protege?
Presume that you have Ac & power steering, w/o AC is similar. 1. Drive car onto ramp. 2. Under the car, remove dirtguard underneath Ac compressor.(10mm bolts) 3. Outside the car (right front wheel), look through wheelwell between AC compressor & power steering you will see 14mm nut that lock tension bolt, loosen it couple turns. 4. Loosen tension bolt (12mm) as necessary. 5. From top of car, loosen top power steering bolt (14mm). (I use magnetic pickup to help put 14mm socket through hole in pulley of power steering pump.) 6. Now you can move power steering pump & take out serpentine belt. 7. Loosen alternator bottom bolt (14mm) & tension bolt (12mm) to take out v-belt. Secondly... for those of you who have a 1994-1997 Mazda Protege with A/C, and your AC compressor has seized up (breaking the belt in the process).... you can actually bypass the A/C!!! Just pick up the belt that is meant for Mazda Protege's that did not come with A/C. The Autozone guys told me it wouldn't work, but I just finished putting one on with the outstanding directions listed above!
How do you replace the serpentine belt in a 1986 Pontiac fiero 2m6 se?
The "serpentine" belt does not serpentine. It runs the alternator and water pump only. To change you will need to work from underneath. If you have AC remove the AC belt by loosing the AC adjuster bolt and sliding the compressor over. If you have to take the AC belt off better change it, they are cheap and you don't want to do this again for a long time. Loosen the alternator adjuster pinch bolt. Some Fireos has a adjuster screw, some don't Move the alternator to loosen belt. Remove and install new. Tension belt to recommended tension on packaging on new belt. Reinstall AC belt, use the tension instructions on the package.
How do you change ac belt on gmc Yukon?
Loosen the tensioner pulley. When the tensioner pulley is loose the belt will come off. Put the new belt on and tighten the tensioner pulley.
