Have the 350 bored to 30 over with the pistons to match, stock rods, and a 400 crankshaft can be used but they have bigger rod journals. the 383 mod is so popular though that a special crankshaft with the 400 stroke and the 350 journals can be bought real cheap
NO, the 383 is called a stroker engine. It is a 350 with a 400 crankshaft that is machined, to make it work in a 350 block. There are other factors and modifications to be made when building a stroker. The only 383 that came from the factory is in Chrysler vehicles.
a 383 stroker is just a 400 crank in a 350 block...so yes
If I remember this correctly its stock 350 4 inch fitted with the 400 crank and rods.
yes.
the 383 is the same block as a 350 so yes it will fit.
== == That would be a 372. It should produce more torque at a lower rpm than the 350. Some machining required. Answer If you do all the mod's, you get a 350 stroker---thats a 383 now.
350...383 is a stroker motor, a 350 with a 400 crank and cam which increases the stroke and adds .3 liters of displacement.
i have a 350 bored 40 over and 400 crank, and been told its a 383 stroker, what is it?
Roughly 6.2 you just never really hear a 383 by its litters as the 305 is a 5.0 and 350 is an 5.7
how do i find the timing on my 383 400 hp stroker motor
You can monitor distributor degrees with a timing light.
using a 350 Chevy big block with a slightly modified 400 crank. best be a 4 bolt main too!