take it to a muffler shop
You have to remove the panel on the valve covers, 4 bolts, and under them are the plugs.
Yes, most cars today, especially those with high performance engines are.
in the trunk behind the rear seat,on driver side good luck
Behind the drivers kick panel
Remove the negative battery cable for 30 seconds. Or you can remove the fuse in the under-the-hood fuse panel marked "EFI" for 10 seconds. This works on most all Lexus models from 90-95.
How do I remove the left side door panel of a 1995 Gmc Sierra without breaking the door panel?
1990-1994 = 250hp 1995-1997 = 260hp 1998-2000 = 290hp 2001-2006 = 290hp 2007-present = 380hp
how to remove the door panel of a 1995 s10
remove front door panel 1995 Nissan maxima
There is a cosmetic panel on the back panel of the trunk. If you remove that, there are 4 bolts on each side, and the tail lights pop out. You cannot get to the bulbs from inside the trunk, they must be removed.
Drivers side by the dead pedal behind the panel.
Follow the Youtube instructions.
Remove the door panel.
On The 1995 Lexus ES300. There is a plastic clip you must remove where the handle is located. Pop the clip using a flathead screwdriver, it should come out easy but just be careful. Next there is another screw on the panel covered by a plastic circular hiding the screw. Remove that, and the screw located underneathe that. Next there is two clips on the side of the panel where it meets the car when it closes. After those are removed, the rest are clips inside the panel. there are about 3 I think inside the panel on the bottom, start from the bottom wiggling the panel, soon enough it will come out. after all that is done and the panel is moving freely, you lift up the panel as the rest is cliped along the top where the window comes up. it's usually best to remove the tweeter cover so you have more room to work with. Hope this helps.
Doyou mean LS400 lexus? The amplifier is integrated with the radio that power the speakers. Be aware that removing the radio on a LEXUS it may not work afterward because of a memory code installed into the radio to make inpossible to steal it.
How can I take apart the dashboard of a 1995 gmc Yukon
check here. http://www.carstereohelp.com/stereoremovalLexusES300StrR.htm
To remove the door panel you will need to find and remove all screws. Once you have taken out the screws you will need to gently pull the panel away from the door.
First, use a screwdriver and remove the screws in the panel and remove the clips. Gently pull the panel off the door frame and remove any wire connections and pull the panel off the rest of the way.
You have to remove the wheel well lining to have access.
Using a screw driver, remove the screws and the clips from the door panel. Gently pull the panel away from the frame, and remove any wire connectors. Then pull the panel the rest of the way off.
Using a screwdriver, remove the screws and the clips in the door panel and pull the panel away from the frame. Remove any wire connections between the two, and the panel will come off the rest of the way.
remove back seat, remove screws bottom and top of panel, remove panel. remove 3 bolts and motor arm, window and regulator will pull out.