0
How do you remove an alternator bracket on a 1998 Dodge Caravan 3.3 Liter engine?
Wiki User
∙ 14y ago
remove belt, remove alternator plugs, then bolts. pull out alternator. then undo bolts for bracket and remove.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How to replace the alternator on a 1993 Dodge Grand Caravan fully loaded?
3.3L and 3.8L Engines The 3.3L and 3.8L engines were equipped with the Nippondenso alternators. 1. Disconnect the negative battery cable. 2. Remove the alternator drive belt, by relieving the tension on the dynamic tensioner. 3. Loosen the nut on the support bracket at the exhaust manifold, do not remove it. 4. Remove the alternator tensioner/power steering bracket bolt. 5. Remove the tensioner stud nut and remove the tensioner. 6. Remove the alternator mounting bolts. 7. Remove the power steering reservoir from the mounting bracket, do not disconnect the hoses, and position it out of the way. 8. Remove the alternator support bracket bolts. Remove the intake plenum to alternator bracket bolt and remove the alternator support bracket from the engine. 9. Remove the alternator from the engine and disconnect the electrical leads. To install: 10. Install the alternator in position on the engine and connect the electrical leads. 11. Install the alternator support bracket, tighten the retaining bolts to 40 ft. lbs. (54 Nm). 12. Install the power steering reservoir on the mounting bracket. 13. Install the alternator mounting bolts, tighten the bolts to 40 ft. lbs. (54 Nm). 14. Install the tensioner and tensioner mounting stud. Install the retaining nut on the exhaust manifold. 15. Install the alternator belt, insert a 1/2 in. extension into the square hole in the tensioner and turn the tensioner. Tighten the tensioner bolt. 16. Connect the negative battery cable.
How do you replace an alternator in a VW Jetta?
Hi, if you are still looking. gas engine Jetta: remove negative battery cable. remove positive cable on alternator. remove blue wire on alternator. Loosen and remove mounting bracket (on top of alternator) be careful not to lose any of this bolt (very hard to find replacements). Remove alternator belt. REmove lower mounting bolt. Remove from engine. Reverse to install. All done. diesel Jetta: mounting bracket is on the bottom and engine mount is on the top. that's the only difference. same procedure. have fun!
How do you remove alternator on 1994 diamante?
Before removing the alternator and bracket assembly from the engine, loosen the assembly bolt by which the alternator is fixed at the alternator bracket. There is only a small amount of room in which to take out the alternator so you will have to work very carefully with it to prevent damaging nearby components. NOTE: If this is a SOHC engine then remove the alternator through the transaxle side, through the bottom of the intake manifold plenum.
How to replace alternator bracket gasket on 2005 BMW 545i?
remove the alternator, remove mounting bolts for steering pump and position aside, remove upper engine mount bolt/nut, support engine with sling, remove the upper engine mount bracket, then finally accessory bracket. whole job with proper tools and equipment takes approx. 5 hours to do. I would not attempt to do this as a driveway repair.
How do you replace the alternator on a 1992 Buick LeSabre?
If it is the same 3800 engine as the 1993 Lesabre--very simple. Alternator is right on top of the engine. Loosen the serpentine belt ( tensioner) - remove the mounting bolts that hold the alternator on the bracket- remove the wire connections.
How do you change the alternator for a 1994 dodge caravan?
Here is how my [http://www.themotorbookstore.com/caravan.html 94 Dodge Caravan Manual] says to do it. 3.0l Engines The 3.0L engines were equipped with either the Nippondenso or Bosch alternators. 1. Disconnect the negative battery cable.2. Install a 1/2 in, breaker bar in the tensioner slot. Rotate counterclock- wise to release belt tension and remove poly-V belt.3. Remove the alternator mounting bolts (2)4. Remove the wiring and remove alternator.To Install:5. Position the alternator onto the engine, then install the wiring.6. Set the alternator against the mounting bracket and install the mounting bolts.7. Rotate the tensioner counterclockwise and install poly-V belt.8. Connect the negative battery cable. 3.3L and 3.8L EnginesThe 3.3L and 3.8L engines were equipped with the Nippondenso alternators. 1. Disconnect the negative battery cable.2. Remove the alternator drive belt, by relieving the tension on the dynamic tensioner3. Loosen the nut on the support bracket at the exhaust manifold, do not remove it.4. Remove the alternator tensioner/power steering bracket bolt.5. Remove the tensioner stud nut and remove the tensioner.6. Remove the alternator mounting bolts.7. Remove the power steering reservoir from the mounting bracket, do not disconnect the hoses, and position it out of the way.8. Remove the alternator support bracket bolts, Remove the intake plenum to alternator bracket bolt and remove the alternator support bracket from the engine.9. Remove the alternator from the engine and disconnect the electrical leads.To Install:10. Install the alternator in position on the engine and connect the electrical leads.11. Install the alternator support bracket, tighten the retaining bolts to 40 ft. lbs. (54 Nm). Install the power steering reservoir on the mounting bracket.13. Install the alternator mounting bolts, tighten the bolts to 40 ft. lbs. (54 Nm).14. Install the tensioner and tensioner mounting stud. Install the retaining nut on the exhaust manifold.15. Install the alternator belt, insert a 1/2 in. extension into the square hole in the tensioner and turn the tensioner. Tighten the tensioner bolt.16. Connect the negative battery cable. Good Luck and Remember.Change Your Mind, Not Your Oil.Use the First In Synthetic Motor Oil's.See My Bio For more information.
How do you replace alternator on 2006 dodge caravan?
how to remove the alternator on 2006 dodge caravan 3.3 lite and also replace the new alternator back on 2006 dodge caravan
How do you change an alternator on a 2000 Dodge Caravan?
The 2000 Dodge Caravan alternator can be changed by removing the alternator belt. Remove the wiring harness from the back of the alternator. Loosen and remove the alternator retaining bolts. Install the new alternator by reversing the process.
There are 2 ways of removing an alternator from a 3.3 L 93 Caravan either from the top by removing the alternator bracket or by dropping the alternator straight down pass the manifold which is easier?
Remove it from the top. But first remove the bracket that holds it in place. That will give you enough clearance to get it out. I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology.
How to you change an alternator in a 1991 Saab 900s?
To access the alternator, you have to remove the A/C compressor. First you must remove the alternator belt by removing the adjustment bolt on the alternator. Move the alternator as far down as you can. This will give you access to the lower bolt on the A/C mounting bracket. Remove the A/C belt. You may have to remove the idler pulley to do this. Remove the three bolts (probably Allen head) that mount the A/C compressor bracket to the engine and swing the A/C compressor off to the right side of the engine compartment. Do NOT disconnect the A/C hoses. You should now be able to remove the bolt(s) that hold the alternator in place. Assembly is reverse of disasssembly.
How do you replace an alternator on a 1991 Chevy Lumina?
If it is just like a 1990 Lumina with a 3.1 engine, the alternator sits on top toward the back... There are 3 bolts that hold it on the bracket... DO NOT be fooled... 2 are simple to remove... the 3rd is underneath toward the back... nearly impossible... The simplest way to change it (after taking the belt off of course) is to take the bracket off off the engine... 3 or 4 bolts... Then remove the alternator from the bracket... You will need to remove the hot wire held to the alternator, but be sure to 1st remove the negative wire from the battery or you could shock the @#$% out out of yourself... Hope this helps...
How do you remove a 2002 Chevy Trailblazer alternator?
First you need to remove the negitive battery cable. Then you need to remove the a/c line bracket. it is attached to the right side on the motor. unscrew the lift hook from the right side of the engine. Remove the electric plug and battery cable from the alternator. Unbolt the alternator and remove.
