Heater Cores and Blower Fans
Dodge Durango

How do you remove and replace a heater core in a 2001 Dodge 1500 truck?

353637

Top Answer
User Avatar
Wiki User
2004-12-01 06:06:37
2004-12-01 06:06:37

You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

You will need to remove the water lines from your 1995 Dodge Dakota truck heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.

User Avatar

It is not an easy job. Get a manual on your car from the parts store or AUTOBOOKSONLINE.COM.

User Avatar

Drain the water from your Dodge Ram truck cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.

User Avatar

in the heater box behind the dash on the passenger side of the truck you have to remove the dash to get to it

User Avatar

Do you have to remove the battery and battery holder?la

User Avatar

Remove the water supply hoses from your 1992 Chevy S 10 pickup truck heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.

User Avatar

replace heater core in a 1991 Chevy work truck 1500

User Avatar

Pull the front dash bezel out that surrounds the cluster and the radio and the a/c-heater controls out and then remove the controller and replace the switch.............

User Avatar

How to remove bed rails from a dodge truck

User Avatar

You have to remove the fuel tank or truck bed to access it.

User Avatar

Remove the water from your 1987 Nissan pickup truck cooling system. Remove the water supply hose. Remove the water return hose. Remove the heater core retaining bolts. Reverse the process to install your new heater core.

User Avatar

Yes, just connect the heater hoses together.

User Avatar

need diagram for heater core for a 1994 Chevy truck.

User Avatar

how to remove and replace transmission fluid pressure switch on a 2002 dodge ram 1500

User Avatar

1- Drain coolant. 2- remove heater hoses from core inlet and outlet pipes in engine compartment. 3-remove screws and heater core cover. ( right side lower passenger compartment ) 4- carefully lower core out of heater unit. This old of a truck it would be wise to replace both heater hoses. Use antifreeze as a lubricant to install heater hoses to new core inlets.

User Avatar

The 1993 Ford F1 50 pickup truck heater core can be replaced by removing the water supply hoses. Remove the heater core retaining bolts. Reverse the process to replace the new heater core.

User Avatar

Take down the transmission oil pan, remove the transmission filter if needed. Replace solenoid. Replace all and refill transmission

User Avatar

You don't have a heater control valve for this truck.......

User Avatar

You need to remove the head lap it has some scews on the side and on front.

User Avatar

You remove the compressor and replace the belt with one for a truck with out ac

User Avatar

From behind the light bezel (under the truck) quarter turn and remove the lamp holder. Replace with an "893" type bulb

User Avatar

You have to unbolt it from the frame that attaches to the hood of the truck.

User Avatar

lift hood look at back of light threr is a twist lock simply twist to remove replace bulb and reinstall


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.