There should be a lock ring on the shaft of the handle that requires a special inexpensive tool that can be had at any parts store along w/ instructions.............s2wbk
Remove the door panel.Remove the bolt from the inside of the door that holds the handle on.
I believe the handle is one whole assy handle holder and lever. remove door panel and assy should rivet/bolt to door
there is screws around the door panel and the right under the handle there is 2 of them then your door is off hope this helps you :)
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
Remove the inside door panel. Remove the door handle linkage. Remove the door handle retaining bolts. The front door handle will come off.
Sorry I don't know
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
You will need to remove the inside door panel. With the door panel removed the entire door latching system will be visible. Reattach the door handle by attaching the door handle retaining bolts.
remove the door panel. The door handle is fastened with two 10mm nuts. just unscrew those and if has a lock, remove the linkage clip from the lock to be able to remove the door handle. Installation is in reverse order. I just replaced mine today.
Remove the 1992 Dodge Dakota inside door panel. The door handle mechanism will be visible. Remove the door handle linkage. Remove the door handle retaining bolts.
Fix It.
You will need to remove the door panel of your 1995 Toyota. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.