On Pontiac grand am its very simple... on the front of the shifter closest to to radio there is a small metal piece down where the plastic meets the metal rod. it run side to side. use a small flat screwdriver and pry it out. its like a big staple. dont lose it or you wont be able to keep the new one on. Too Easy! for the guys who told you to unscrew it...., go back to the trailer park.
Andrewthemechanic@shaw.ca
your Canadian mechanic
To remove the gear shift knob on the SLK 320, first pry the cover from the gear shift knob. Then, use a screwdriver to remove the screw in the center of the knob. This will then allow the knob to be removed.
How do you remove the gear shift knob on a 2000 Daewoo Lanos?
To remove the gear shift knob on the '03 Silverado, first pry off the cover that has the shift pattern on it. Then, remove the screw that is under that cover to remove the knob.
how to remove gear shift knob on bmw318
The gear shift knob on a ford Ranger is pressed on tightly. A heat gun or hair dryer can be used to heat the knob to help remove it.
There is a clip on the front of the knob. Pry it out with a screwdriver.
You should just be able to unscrew it by rotating the whole knob counter clockwise.
Look at the base of the shift knob towards the dash and you will see a push in clip that you pull out and the knob will come off.
Check
look at your shift knob for mine(1997) just take to gear 2 and look u will see a litle metal clip .. take a screwdriver and get it out .. and than just get out your shift knob :P
The gear stick not is held on with a retaining clip. The retaining clip is just below the gear shift not. Hold the retaining clip in, on both sides. The knob will come off.
forget to tell, the car as an automatic transmission