Want this question answered?
On my 2007 Sonata I had to replace the brake pads and rotors at 57000 miles.
= What tool to remove a front brake pads on a 2007? =
You can change the brake pads on your 2007 Honda by removing the wheel. Remove the brake pad springs. The brake pads will come off. Reverse the process to install the new brake pads.
For exact spec refer to service manual if figure is not located on rotor.
Deseronto Transit was created in 2007.
Garden in Transit was created in 2007.
Transit of Venus - opera - was created in 2007.
9mm on front 7mm on back
will be on right hand side in front of brake pedal , will have to remove right hand side radiator cover to gain access
Hello, Removing the front rotors on an Acura TL is clockwork. Here is a quick how-to guide: 1. Raise and safely support the vehicle. 2. Remove the front wheels. 3. Remove the brake hose mounting bracket. 4. Remove the brake caliper bracket mounting bolts, and remove the caliper assembly from the knuckle. 5. Remove the rotor retaining screws. 6. Remove the brake rotor by pulling it straight off the wheel mounting studs or if seized in place, remove the stubborn brake rotor by threading in two 8 x 1.25mm bolts, two turns at a time until the brake rotor is released. Good luck with your brake job!
Changing brakes is pretty simple. A person has to lift the car with a car jack, remove the tire, brake shoe, and old brake pad. Then put in the new brake pad, replace the brake shoe, put the tire back on the car, and lower the car.
How do I change the brake pads on Toyota tacoma 2007