the part you sit on,,,,push FIRMLY against the lower part to "unhook" it. when removed, you will see the bolts retaining the back.
Push (hard) on the front bottom of the seat to release locking clips Lift out bench Bottom of back of seat clips or bolts will now be exposed release these clips or bolts - push up on the back of seat to release upper clips to remove seat back
On my 1984 190E, it is simple - there are a couple of tabs at the bottom of the back seat (where your heels would be if you were sittng), you have to look, the seat will pull right out!
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
easy, from the front push the bottom seat in or back then up to unhooked them from the floor, 2 locations (underneath from were one sits) then remove torx bolts holding seat belt buckels & back seat, finally lift up back seat and pull out..
how to remove 2004 scion back seat
Behind the back seat
To remove the back seat of a Skylark, reach into the area between the back and the seat and pull up on the seat. The back part of the seat is bolted in and will require a socket wrench to remove.
well the first thing is to remove the lower seat. It has two clips near the front of it . Remove the lower seat now. Next remove the side panel right above the back seat. Now you have to remove the bolts for the seat belts, it holds the back part of the seat in. move the back part of the seat up towards the back window. You should hear the seat come loose. Now when you put the seat back in don't forget to pull the seat belts back though.
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
First you remove the lower back seat, and the bolts that secure the upper will be exposed. Remove them and lift out upper back seat.
the back of the seat is the front of the trunk. To remove the rear seat back you first have to remove the two bolts just under bottom seat assembly. Bolts are located at the botton of lower seat, about between your ankles if you were sitting in the seat, one on each side. Then remove bottom seat assembly. Then remove seatbelt bolts that hold seat back assembly, lift straight up on seat back and remove.
To remove the back seat on a 1989 Ford Thunderbird, the first step is to remove the back of the seat. The back is held in by bolts on each side. After the back is removed, the seat area should come out after removing the floor bolts.