Mazda
Chevy Impala
Ford Expedition XLT
Ford F-150

How do you remove the door panel in a 2002 Mazda Familia?

676869

Top Answer
User Avatar
Wiki User
2006-02-21 12:00:04
2006-02-21 12:00:04

remove screw in door handle latch and the main big handle.depends what sort of door it is, you might have to prise off the outer plastic trim of the handle.think theres more screws in the door bin.then get big screwdriver and prise the door panel off, starting at the bottom.if its holding anywhere, check for screws in that area. when its hanging off the top window strip, lift the panel upwards to free it.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

How do you remove the driver door panel on a 2002 Cadillac deville?

User Avatar

How do you remove the right rear door panel from a 2002 Bonneville sle

User Avatar

How do you remove the inside door panel on a 2002 ford F150 supercrew?

User Avatar

Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.

User Avatar

remove door panel on a 2002 gmc truck

User Avatar

The 2002 Toyota rear door panel is held in place by six retaining clips. Pry outward on each retaining clip to remove the door panel.

User Avatar

Using a screw driver, remove all of the screws and the clips from the panel of the car. Pull the panel away gently, remove any wire connectors, and then pull the panel off the door.

User Avatar

The door panel on a 2002 Honda Civic is held on by several mounting screws and clips. Remove the mounting screws first, then pull the panel off. The remaining clips will just pop off.

User Avatar

First, use a screwdriver and remove the screws, and remove the clips. Next, gently pull the panel, and remove any wiring connectors, then pull the panel off the rest of the way.

User Avatar

Remove rear seat, there is an access panel for the fuel filter. Remove access panel and have access to fuel filter.

User Avatar

Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.

User Avatar

The 2002 Pontiac Bonneville rear door panel is held in place by eight retaining clips and two screws. Remove the screws that can be found near the door handle. Pry outward on each retaining clip to remove the door panel.

User Avatar

Remove the air breather and its underneath.

User Avatar

You can't remove just the inside handle. The handle is part of the door panel.

User Avatar

pour gas on it and light it on fire

User Avatar

how do you fix a window on pass side of a vw passat 2002

User Avatar

Under the dash, left side you will have to remove the close out panel.

User Avatar

It is in the trunk. You have to remove the you trunk carpeting and it will reveal a silver plate.. Remove that and there is your filter.

User Avatar

you take out the two strews on the side, then the strew in the area of the window button pry off the panel

User Avatar

The 2002 Chevrolet Astro Van passenger door panel is held in place with two retaining screws and eight retaining clips. Remove the retaining screws and pry outward on the retaining clips.

User Avatar

if its equiped with a door panel then you have to remove it. Once removed, there should be access holes to get to the back of the handle to remove it. the door panel will probably have a few screws in it. There are either clips holding the panel on which you can just pull hard on the panel to remove or there are plastic hooks molded to the panel in which you have to pull up and out to remove the panel. Just pull the panel up a little and peek in to see whats holding it on. Once removed there should be access holes all over the place to remove the handle.

User Avatar

remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo

User Avatar

remove side inner panel and remove the nuts and assembly will come out

User Avatar

Open drivers door and remove cover near light swicth.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.