May have a horseshoe type clip on the concealed back side Tool available at auto parts store -not expensive
You need to get a window crank removal tool from an auto parts store. Simple pressed steel tool for less and $5.
with a window crank removal tool.
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
You will need to remove the inside door panel of your 1977 Chevrolet blazer. Remove the window crank linkage. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
You need to remove the window hand crank with a window hand crank removal tool.
How to Remove or Install Car Window Crank Handles check related link below
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
Pull out the U-clip located on the base of the window crank.
you can buy a window crank removal tool at an autoparts store that pulls the little pin off to remove it.
Its located under rear manifold remove coils and bracket reach just behind manifold 10mm socket needed
How do I get my door panel off
You can remove the window crank handle by just using a simple shop rag. How you do this you slide the rag(unfolded) between the door panel and window crank and rotate around the window crank until you snag the clip that is retain the window crank. The clip is a simple wire clip shaped like a "C" To reinstall you place the clip back in the groove on window crank and press back on the window regualtor shaft