How do you remove the driver's side door panel on a 1997 Chevy Z71 pickup?
Go to the following website. It's for removing the side mirrors, but it shows how to remove the door panel. kwmuth.com
Awesome suggestion--it helped out right away. Read the details and look for the arrows! http://kwmuth.com/techsupport/pdfs/21000040.pdf
How do you get the door panel off to replace the door handle on drivers side in a 1998 Chevy pickup?
You need a special tool to remove the door and window crank and a tool for the retainers. TAke the inside handles off and then all o f the screws you can find then the retainers around the sides and bottom of the panel. When all is loose, pull out on the bottom of hte panel and push in on the top to disengage it from the door.
To remove the door panel. Just simply take something like a screwdriver and put in between the door and the panel. The panel is held on with little plastic like snaps.. That will get the panel off.. and if you was to brake one.. any part store carries the little plastic things for like a dollar or two for about 20 of them.
How do you replace the drivers side mirror without taking off the inner door panel for a 2002 Chevy venture?
I have a 1992 Toyota pickup, Had a HARD time finding the horn relay myself. The horn relay on my 1992 Pickup is located on the drivers side, to the right (or towards the front of the truck) of the small fuse block that has an access panel door on the kick panel, you have to remove the kick panel to see the relay, in my case it was just unplugged, plugged it back in…
Where is the second heater core in a 1991 ford aerostar located - is the heater system a loop system?
I currently have the drivers door panel off of my 1995 sierra and it is a fairly simple task: Here is how I did it. 1. Remove 2 vertical screws in the arm rest. 2. Begin at the bottom rear corner of the poor panel and pry a flat bar, screwdriver, putty knife between the panel and the door. There are 3 pegs along the bottom and 3 up each side that have to popped…