First disconnect the connectors under the seat. Remove the 3 bolts (Front Left, Front Right, Rear Right). Remove the nut from the Left Rear. Lift seat up and out.
How do you remove the driver s seat from a1997 mercury villager
To remove the driver's seat on a 2007 Suzuki 800c Intruder you need to remove the headrest and remove the screws. Next, remove the bolts and washer on each side of the front of the driver seat.
1993 kawasaki voyager motorcycle how do you remove the driver seat?
Remove the nuts! They are on the lower metal frame the seat
Remove the bolts. Its as simple as that!
Should be a bolt in each corner of the seat
On newer models, you have to move the seat all the way forward, remove side trim cover, remove seat belt anchor bolt, remove seat rails retaining bolts, tilt seat upward, disconnect wires, remove seat...
You have to remove the Allen bolt on the rear of the passenger seat, then remove the two Allen bolts exposed when you removed the passenger seat. The driver seat should slide back and off now.
Depending upon what year, it is typically under the rear seat on the driver's side. You should disconnect the negative terminal on the battery first and then remove the seat cushion bottom from the driver's side rear seat. Depending upon what year, it is typically under the rear seat on the driver's side. You should disconnect the negative terminal on the battery first and then remove the seat cushion bottom from the driver's side rear seat.
Look under the frigging seat. There are nuts or bolts on the brackets under there holding the seat to the floor. It is up to you to remove the right bolts.
remove bolt on the back of passenger seat, pull that back and out. Then driver seat just pulls back and out as well.
The tray bolts to the driver's seat. While the Tray is up, pop off the plastic part on the Driver seat that covers the covers up where the tray arm mounts to the driver's seat. Unbolt the two bolts securing the tray arm to the seat. Remove the tray, replace bols and cover.