0
first remove the battery cables, then loosen the belt, and then between the actual fan and the engine their are aproximately 4 small bolts that must be removed and then it should come right off!
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How take off fan clutch on a 1993 mercuy grand marquis?
To remove the clutch fan on a 1993 Mercury grand marquis hold the fan in place using a clutch fan tool, then remove the holding nut. Most large auto parts chains will loan you the tool.
How do you remove fan from 1993 ford econoline e150 4.9liter 6 cylinder?
You need to rent or buy a fan clutch removal tool kit. you need to remove the fan and clutch as one before you can separate the fan from the clutch.
How do you remove clutch fan from 1993 explorer?
to remove a clutch fan on a ford, you need special tools . also fan thread is left hand thread ,so you unscrew it clockwise
How do you change a clutch fan in a 1997 Ford Aerostar?
First remove the accessory drive belt- then loosen the large nut that attaches the fan clutch assembly to the water pump pulley being careful to loosen the nut clock wise not counter clockwise (It is a left handed thread)-now you can remove the fan to clutch bolts so you can separate the clutch assembly from the fan.
How do you remove fan clutch of a 1985 buick regal?
Remove the fan itself then remove the clutch from the fan
How do you remove the clutch fan on a 1993 Ford F-250 so the water pump can be replced?
AnswerTo remove the clutch fan, undo the bolts that hold it on. Then take a puller and pull it of the shaft. Then you can get at the water pump. Also remember that the fan shroud has to come out first. A fan clutch wrench set would help you.
How do you remove the fan clutch on a 2001 Ford Ranger?
you have to have fan clutch wrenches
How do you replace the fan clutch on a 1999 Tahoe?
Remove the fan belt, by loosening the tensioner pulley. Remove the fan clutch with the retaining bolts. Reverse the process to install the new fan clutch.
How do you remove a fan clutch on a Chevy Tahoe?
To remove the fan clutch on a Chevy Tahoe, the upper fan shroud must first be removed. Once removed, a tool is needed to hold the clutch in place to allow for the fan to be removed. The nuts must be unscrewed on the fan in a counterclockwise rotation. Remove the nuts on all side and the fan clutch will remove.
Removing the clutch fan on a BMW 530i?
how to remove the clutch fan on the 530i bmw
How do you remove the plastic fan enclosure on a 2000 V6 Dakota?
remove the fan clutch and fan first
Fan clutch removal for 1992 for aerostar 4.0?
== 2.3L Engine # Unbolt and remove the fan guard. # Disconnect the overflow tube from the shroud, remove the mounting screws and lift the shroud off the brackets. # Place the shroud behind the fan. # Remove the 4 clutch/fan assembly-to-pulley screws and remove the clutch/fan assembly. # Remove the 4 fan-to-clutch screws. To install: # Position the fan onto the clutch assembly, then install the retaining screws to 55-70 inch lbs. (6-8 Nm). # Position the clutch/fan assembly onto the pulley. Install the mounting screws to 12-18 ft. lbs. (16-24 Nm). # Position the fan shroud onto the radiator. Install the shroud mounting screws until snug. # Install the fan guard. 2.8L, 3.0L and 4.0L Engines # Remove the accessory drive belt. For more information, refer to Section 1. # If necessary for added clearance, remove the fan shroud retaining screws. CAUTIONThe large nut which attaches the fan clutch to the hub of the water pump shaft has a right-hand thread and must be rotated clockwise for removal. # Using the Fan Clutch Holding tool T84T-6312-C and Fan Clutch Nut Wrench T84T-6312-D, or their equivalents, loosen the large nut attaching the fan clutch to the water pump pulley. # Remove the fan/clutch assembly. # Remove the fan-to-clutch bolts, then separate the fan from the clutch assembly. Fig. 1: The cooling fan mounts to the fan clutch, which in turn attaches to the water pump pulley - 3.0L and 4.0L engines Fig. 2: Use the two fan clutch tools to remove the fan clutch from the water pump pulley To install: # Position the fan onto the clutch assembly, then install the fan-to-clutch mounting bolts to 53-71 inch lbs. (6-8 Nm). # Position the lower edge of the fan shroud in the lower retaining clips, then install the fan shroud attaching screws until snug. # Using the holding tool and clutch nut wrench, or equivalent, install the fan/clutch assembly onto the water pump pulley. Remember, the fan/clutch nut has a reverse thread and must be turned counterclockwise to tighten. Tighten the nut to 30-100 ft. lbs. (41-135 Nm). # Install the accessory drive belt.
