pully wheel should come off with fan when you remove 4 bolts that hold fan to waterpump
Remove serpentine belt. Remove pulley. Install new pulley. Install serpentine belt.
you need a steering wheel puller.
Remove any bolt on pulleys, remove center bolt counterclockwise, remove the harmonic balancer with proper puller available for rent or sale at your local auto parts store.
You will need a special puller to remove and replace the PS pulley. If you attempt to do this without the special tool you will damage the new pump and/or the old pulley. The rest is straight forward.
I need a diagram for a serpentine belt for a 1994 f150 with 5.0 engine I need a diagram for a serpentine belt for a 1994 f150 with 5.0 engine There should be a sticker near radiator shroud that has belt routing. If not stick the belt down past the right side of fan/water pump .put belt on crank pulley then pull back of belt over water pump and then down around power steering pulley and up over compressor pulley. put belt from crank pulley around smog pulley then up to tensioner with back of belt around tensioner and then around alternator pulley.next put rachet and socket(15 mm) on tensioner and pull on it while placing belt under idler pulley.
first you should release the belt tension pully and remove the belt. Then the idler pully has a bolt through the center remove the bolt and the pully should come off.
the fan and assembly are screwed on the pump. how do you remove
Go to NADA.com
yes you do. here is a link to a site that shows pictures on how to perform the task. http://www.rpmoutlet.com/asp54blowerinstruction.htm
How to remove the factory radio and disconnect wirring harnes in a 2004 f150 ford truck
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
No. Only up to model year 77.5