You will need a 3/8" Allen wrench to remove the two slider pin anchor bolts at which point the rotors will slide off the brake pads.
Remove wheel loosen and remove flexible brake line to caliper Remove 2 mounting bolts Slide caliper off rotor
Front or rear, remove wheel, remove caliper, remove caliper bracket, remove rotor.
T55
Remove the tire and wheel from your 1998 Chevy Astro Van. Remove the brake spring and caliper. The brake pads will come off. Reverse the process to install the new front brakes.
When you remove the caliper, the pads can be pressed out by hand.
You rem ve caliper, remove old pads, fit new ones.
Remove the brake caliper and hang it out of the way, then thread 2 8 mm bolts into the holes provided on the disk. Screw them in and the brake rotor will come off.
two bolts in the steering knuckle and the brake line are all that attach to the brake caliper
Remove the wheel, remove the two caliper bolts and hang the caliper with a wire or bungee cord: you don't want any pressure on the brake hose. Then remove the two caliper carrier bolts and remove the carrier. The rotor just slides off after that.
you have to remove the caliper to access the brake pads
It takes a FA12A Allen wrench.
No.