To remove the headlamps you will have to remove the front bumper first.There are some bolts on the inside of the wheel well.You must get under the car and remove about 8 clips from the bottom of the bumper and two from the top. The books say to disconnect the battery so your airbags dont deploy but i never had to.the bumper comes right off and then you remove 2 bolts that hold the headlight assembly together.
right this is pretty intense....you take off the old headlamp, right? then..get this! you put the new one on eeeh!
There was not a 1999 Honda Accord LXi made. Do you have a 1989 Honda Accord LXi?
Installation of what?
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
No, but you have to remove the wheel assembly and transmission.
take a baseball bat and smash the light with it.
i just recently did this and its not easy lol. you have to completely remove the spindle from the car and press the wheel bearing out along with the hub assembly.
To change the headlight bulb you do not need to remove the headlamp assembly. Pop the hood and behind the assembly is access to the light bulb, just unclip it and carefully pull it out from the hole. Then you can remove the old bulb and put the new one in. Don't touch the light bulb! It won't work if you do.
Open the hood to the engine compartment. Remove the headlight wiring harness. Remove the headlight assembly bolts. There are four headlight assembly bolts. The headlight assembly will come out.
to remove the bulb simply take the four screws that attach the front assembly and it will give you access to the bulb.
Download the manual at http://www.hondahookup.com/manuals/
how do i remove the fan/blower motor on a 2001 Honda Accord LX?
How do you remove a water tube from a Honda accord 91 ex
1994 Honda accord ex remove rear rotor
How do you remove an air condition belt on a 1994 Honda Accord EX?
Remove the wheel then remove the two calipher bolts that hold the calipher to the spindle. Then remove the calipher assembly out of the way and support it. Do not allow the calipher assembly to hang from the brake hose. At this point the rotor can be removed......1930fcoupe
The distributor assembly on a Honda Accord sends a spark to each engine cylinder at precise moments throughout the combustion cycle. It is controlled by the rotation of the cam shaft.
This video on YouTube (see Related Links) will show you how to remove the front bumper cover from of a 2004-2007 Honda Accord.
Possibly if there is an access panel. If you find none, then you must remove the tank.
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
how do i remove the radio out of my 2001 Honda accord 2.oi v tec to replace with a CD player because it comes up coded
you have to remove the lock clinder
The 1993 Honda accord, I believe, does NOT have CD Player. It only have cassette and radio player.