you will need to remove all of the bolts first, once that's done lift straight up. Be careful though. its only plastic and if you break something its not going to be cheap.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
remove door panel to check it!!
Here's a great how to video that will show you how to properly remove the door panel on your 2005 Chevy Malibu. A link has been included below.
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
You have to remove the inside panel, where the window crank is, or would be.
Using a screwdriver, remove the screws that are in the door panel, be sure to remove the clips as well, and gently pull the panel away from the frame. Remove any wire connectors between the frame and the panel, and pull the panel off the rest of the way.
how do i remove the passenger door inside panel?
the horns are located on the passenger side under headlight in the fender. remove the plastic panel to access them. you may have to remove wheel also.
open the driver side door. There is a panel on the dashboard that is really easy to remove when the door is open... ope panel, see fuses and on the panel is a diagram to locate which is which!
Unless there is an access panel in the trunk you will have to remove the fuel tank. I would check with your Chevy dealer, as this may still be under warranty.
Remove the dppr panel and there are screws on the inside.
how do you take the dash board outon a 2006 chev Malibu