its real hard!! you gotte first remove the plastic trim surrounding the door openings- when i was faced with this,i opted to order some custom covers that fit very nicely on the kicks beside the footwells- surprisingly cheap,and look quite proffessional looking then you have a greater range of speakers to choose from as well.
If you open the hood, there are 5 small nuts that hold that hood molding in place. simply remove those and you can remove/replace the hood molding.
If you open the hood, there are 5 small nuts that hold that hood molding in place. simply remove those and you can remove/replace the hood molding.
Which speakers and which moulding exactly are you refering to? If you are talking about the door speakers: Just remove the screws on the panel and inside of the door handle and inside of the armrest on the door there is a screw. Then you must remove the door handle by using a screwdriver to pry off the clip behind the door handle. After that just pop the panel off.
To replace the back speakers in a 2006 Acura TL, remove the SRS housing on both sides and the back panel of the speakers. Remove all wiring attached to the speakers and replace.
You need to remove the inner part of the glove box.. you will see two screws in the compartment that the insert covered. Next take off the trim around the instrument cluster by removing the screws on the top of it that secures it to the top dash pad... remove the molding.. there will be two screws under that, one being to the right of the radio,, the other about the same to the left.. The there are two screw in the defroster molding that need to be removed... Pull out the top dash about half an inch and then pull up and remove it.... Then you can remove the speakers and the replace them if you wish.......
Remove the covers from your 2003 Chevrolet Avalanche speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
To replace the speakers in a Town and Country you will need to remove the old ones first. Consult your owners manual for how to take out your speakers.
In order to replace the speakers you have to flip down the rear seats and look at the screw ports and remove all the screws to remove the panel covering the speakers. The rest is self explanatory.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
Remove the covers to your 1997 radio speakers. Remove the radio speaker retaining screws. Remove the wiring harness from the back of the radio speakers. Reverse the process to install your new radio speakers.
Remove the door panels and replace the speakers. They sit in baskets and are simple to replace. We have instructions at our enthusiasts forum. www.trailvoy.com
Remove the covers to your 2000 Chevy Malibu rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new rear speakers.