Raise and support vehicle. Remove wheel and tire. Drum may have 1 or 2 screws in the front of it but doubtful. If there are...remove them. Beat on the corner of the drum until it pops loose. (see Figure 1) If it does not pop loose you will need to go through the back with a brake spoon and release the tensioner. Figure 1 __ / /_______ / _________| /_/ _____________ / \ / \ |_______________|
They should fit as both years are the 3rd generation Accord.
If you are inexperienced, you should not be messing around with the brake drums.
brake drums should pull off if not rusted on.
Remove the wheels, pry the drums off.
Remove the drums and take them to an auto parts store that has a brake drum lathe.
Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.
experience and a big hammer
hammer my friend
very carefully :)
what is the question about the back brakes?? they are usually drums
No, the drums can be cleaned with brake cleaner.No, the drums can be cleaned with brake cleaner.
first you have to take the wheels off of the van,and then you have to take the tension off of the brake shoes. Next you will be able to remove the rear brake drums off of the vehicle.You may have to tap them with a hammer to break them free.