Want this question answered?
Probably 2002
remove seat. remove tool case. Remove terminals from battery, lift out.
10-30 motor oil with HTO additive
Open both front doors and remove everything between the firewall and the front seat :(
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
you have to completely remove the seat belt case and replace the seat belt, you can go to a junk yard, and get one from a compatible car.
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
On newer models, you have to move the seat all the way forward, remove side trim cover, remove seat belt anchor bolt, remove seat rails retaining bolts, tilt seat upward, disconnect wires, remove seat...
You have to remove the drivers seat and pull up the carpet.
The bolts are visible at the base of the seat. Remove them and lift out the seat.
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.
Move seat fully forward, remove side trim, remove seat belt retaining bolt, remove seat tracks rear bolts, flip seat upwards, disconnect wiring, remove seat.....