you can go to Autozone and use the loaner tool, but you can do it the cheap way. Get some vise-grips and clamp on the wheel behind the nut, making sure to secure it in away that it does not rotate. Then get a pipewrench and secure it to the bolt. With a hammer, hit the handle of the pipewrench a few times, it will come loose. Remember, to hit it counter-clock wise, it has reverse threading.
Axe?
how to remove lighter socket from 2013 dodge durango console
If Possible Get rid of your Clutch Fan and go Electric! But to answer the question, remove serpentine belt and use a strap wrench to stop clutch from spinning when you try to remove fan clutch nut from water pump!
It is not adjustable.
Take belt off water pump pulley remove fan from pump (4 bolts) remove old clutch from fan install new with same bolts Put fan back on.
How do you remove drive shaft from a 03 durango
Using a special clutch fan tool to hold the fan still, remove the fan nut and take the fan off of the dodge 360. The tool should be available for rental from a local auto parts.
link here: http://www.craigcentral.com/durango/speakers.asp
remove the door panels
A Hayden is $135 from Advance Auto or $70 from Ebay
The fan clutch on a 2007 Dodge Ram is turned clockwise to tighten, counter clockwise to loosen.
Dodge Durango was created in 1998.