The tool that you will need, is a screw driver flat, phillip and a 8 mmm socket. Remove the screws from under neat the cover. The cover is held on by clips. using the flat head screw driver, slide the flat head screw driver in between the hard plastic and cover to remove the clips, work your way around the cover with the screw driver. and then pull down on the cover, the cover will drop down, To remove the switch, depress the clip on the side of the switch and rotate it 90 degree, the switch will pop out. out.
The brake light switch is located on the brake pedal assembly. 1. Remove the cover below the instrument panel 2. Remove the electrical connector. 3. On the switch their is a locking tab the prevents rotation. Press the "tab" and rotate the switch 90 degrees. 4. Remove switch.
The brake light switch is located under the dash drivers side under a sound cover held in place by 2 screws, not that hard to remove.
How do you remove the brake light cover on a ford focus
how do you remove the brake light cover on a 1991 gmc tracker? Do you go from the outside or inside?
Replace the switch under the dash. First remove the cover, then find the switch mounted neer the brake pedel.Remove the wiring plug then disconect from the bracket.
you squeeze the tabs in the middle gently inwards then pull the cover toward the front of the car.the brake light housing itself has a tab on either side of it that you need to press to remove the light .
How do you remove cover to replace brake light on 57 kia Rio
The tcc switch (tcc brake switch) is located under the dash near the brake pedal. The tcc solenoid is located under the side cover in the transmission/transaxle. The tcc switch (tcc brake switch) is located under the dash near the brake pedal. The tcc solenoid is located under the side cover in the transmission/transaxle. The tcc switch (tcc brake switch) is located under the dash near the brake pedal. The tcc solenoid is located under the side cover in the transmission/transaxle.
Remove the fuse board cover at the right hand side of the steering wheel, the switch is located behind the mass of cables, a quarter turn to the left will allow the switch to be removed.
carefully
Right in front of the valve cover. You have to remove a cover to access it.
you un bolt it