you'll need both a Philips head and a flat head screw driver. there will be 3 screws that you need to remove and several clip type fastenners (sorry don't know the exact name). one Philips screw is located near the door lock mechanism, on the part of the door that is hidden when the door is closed. with the door open you'll see it right away. another Philips screw will be near the door hinge at the lower part of the door trim. it is covered by a plastic cup that is the same color as the door trim. just flip the cup out and it will expose the screw head. the 3rd Philips screw is a bit tricky. it is behind the door handle (that thing you pull to open the door from the inside). pull the door handle and you'll see the screw. after you have removed the 3 screws carefully lift out the trim from the rest of the door. you will find several clips holding the trim to the door. use a flat screw driver to detach the clips one by one, taking care not to break the clips (they're made of plastic) or scratch the paint. putting it back, just position the trim over the door, and then push or snap the clips back by giving it a punch with your open palm. then install back the 3 screws.
suggestion: while you've got the trim out, it will be a good idea to squirt some wd40 on the locking mechanism and the window mechanism. or if you're up to it, remove the plastic that waterproofs the door, taking care not to tear it. them remove the old grease from both locking and window mechanisms, and apply new grease. then install the plastic waterproofing back. the plastic has an asphalt-like adhesive that glues it to the door, you can just tap it back.
remove the broken one and replace with a new and working bulbs.
Is there a special tool that is needed to remove and replace the brake shoes?
The easiest way to reset the your 2007 Mitsubishi Lancer car alarm is to remove the car alarm fuse. Keep the fuse out for 10 seconds and replace it to its original slot.
In a 2004 Mitsubishi Lancer replacing the rear light bulb is relatively easy. First remove the plastic cover from the dome light. Unscrew the light bulb and insert the replacement.
a press
Just remove sidings from the door (inside), then remove all bolts you will see, i think 6 pcs. then you can easily figure it out how you will remove the motor from the door shell.
Here´s the answer..http://forums.evolutionm.net/lancer-how-tos-installations/297464-how-amplifier-installation-remove-radio.html
to change the lights you remove the dash cluster and replace the bulbs. the number for the bulbs are 197
go to file manager and remove it man
To replace the back speakers in a 2006 Acura TL, remove the SRS housing on both sides and the back panel of the speakers. Remove all wiring attached to the speakers and replace.
To remove weight on any car you should try installing a weight reduction kit on it.
how do you seperate the the centre mirrow head from the screen mount