0
How do you repair the loose bolts on the top hinge of my 1992 mustang?
Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why is the hinge on the 3DS loose?
By design, the 3DS' hinge should be slightly loose. This is to prevent the hinge from breaking if the system is dropped or shaken violently. (A tight hinge would break easier.) The hinge shouldn't be so loose that the top screen comes out of its locked position under normal use. If this happens the system should be sent to Nintendo for repair. As well, the left side of the hinge will be slightly more loose than the right. This is because extra space was needed for wiring that travels through the hinge between the top and bottom halves.
Can you use a word hinge in a sentence?
The hinge of the door is loose.
How do you repair a loose door handle on a 1999 Rodeo?
simply tighten it. it may be out of line now if it has been loose. to realign it you just have to adjust hinge it's really easy all you need is a socket wrench.
Door on 1997 Chevy lumina will not close could the latch be broken or should you just play around with it?
Lift the door from the bottom if you can move it up and down your bolts on the door to hinge bolts could be loose or the main pin that hold the door hinge from the car and door may have elongated the hole making the door drop down.
Are your glasses fixable after the hinge is loose and the arm is free to move around?
dffdsfd
Shutters Repair?
For the safety of premises, we need to install shutters. For smoothening working of shutters, they have to need for repair or maintenance from time to time. I will recommend ADV Contractors Ltd for getting shutter repair services.
Ow to remove title steering on 1989 Chevy truck?
Are you looking to repair the loose bolts to tighten it up or remove it from the truck totally? Let me know i will help all I can.
How do you repair a loose window on a 1991 Mustang GT?
i have a 89 gt 5.0 . theres little plastic clips on the middle back and bottom front of the window. pull the window out and replace them. it should help.
If you door is drop a little what do you need?
First, make sure that the hinge pin isn't worn and loose. Open the door and lift it up and let it down a few times to see if the hinge pin is loose. If it's loose, replace it. If not, lift HARD on the door. You can usually straighten a bent hinge that way. If that doesn't work, try a block or large screwdriver handle at the BOTTOM hinge, then close the door on the block hard enough to slightly bend the hinge back. Don't get carried away, it usually doesn't take much. It's typically trial and error, so keep checking it as you try to straighten the hinge.
What would cause your steering column on a G20 van to become loose?
There are 4 bolts at the bottom of the steering column that tend to get loose after entering and exiting your vehicle. Pulling your self up on the steering wheel puts stress the steering column and causes it to become loose. If you do not correct the problem fast by tightening the bolts you will have to replace the entire steering column.. -Henry's locksmith and steering column repair
How do you repair a loose mounted riding lawn mower engine?
There should be 4 bolts on bottom of the engine, make sure they are still there and tighten them, they can loosen up or even fall off.
If your driver side door is loose and you have to slam it to close how do you tighten it up to make it like the passenger side?
Have someone lift and shake the door while you watch the hinges to see if they are loose. If the hinge pins are worn, the door will sag and make it difficult to close. You also may need to replace the nylon bushing on the door strik pin if there has been too much weight when the door closes. The strike pins can be replaced but if you haven't already done one, you might want to have someone help you or do it for you. It happened to me. If you open the door, lift up and down on the bottom of the door to see if it loose where the door hinge is bolted to the fender. If it loose where it is bolted to the fender, you will need to tighten the bolts. If the nuts are stripped in the fender, take it to the body shop. What was stripped in my door was the nuts inside the fender that the bolts went into. You could just have a stripped bolt. I had the choice of taking off the whole fender to fix it or weld the door hinge tho the fender. I chose to have the body shop weld the hinge (much cheaper). They did a perfect job welding the hinge so the door fit and matched perfect. I bought the car used and the fit was better that when I bought it.
