You have to drop the transmission or pull the engine. remove the flexplate and oil pan.
In middle of crankshaft pulley
The Crankshaft Position Sensor senses it's position from a toothed timing ring behind the Crankshaft pulley. The CKP is above and to the left of the crankshaft pulley.
this site^ will show you a how
£99.50 FROM FORD HAVING ONE FITTED TUESDAY
There are 4 little screws around headlight, remove then unplug and replace. Vdubwizard
Check out the related link for a video on how to replace a crankshaft position on a Ford Focus SE.
The crankshaft sensor on the Ford F-150 is located behind the air conditioning compressor. To replace the crankshaft sensor on this vehicle, the air conditioning compressor needs to be removed first.
easy take old one off replace with new one! simples no
To replace the crankshaft positioning sensor on a 1989 Ford Sho Taurus, go near the water pump at the front of the car and remove components that block access to the sensor. Remove the two bolts holding the sensor in place remove the wire that sends data. Finally, replace the crankshaft positioning sensor.
The 1994 Ford F1 50 crankshaft sensor is located on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
Replace the chain and both the cam and crankshaft gears.
save money and let the local shop rip you off!
It is the engine speed curcuit that is malfunctioning. Replace the Crankshaft position sensor.
The Ford Tempo was introduced as a 1984 model to replace the Ford Fairmont. Then it was replaced by the 1995 Contour. That's a production run of 10 years. (1984-1994).
yes
1984 Ford 351/302 crankshaft balancer (vibration damper). The 351 had a 28 oz and the 302 had a 50 oz damper.
On a 1997 Ford Taruas I was just quoated from Ford Dealer 375.00 labor plus parts