Want this question answered?
To replace the brake light switch on a 1995 GMC Sierra 1500, the steering wheel will have to be dismantled until the brake light switch is reached. The switch is changed by unplugging it and plugging in a new one. There are screws holding the switch in place.
If you replaced the brake switch it sounds like you put the new one on backwards.
Worn brake pads can cause the brake light to blink on the dash in a 1993 GMC Sierra 1500. This can also be caused by a faulty light.
how to replace battery
how to remove cover to replace ignition lock cylinder and what type of tools do i need
If all have failed possible fuse or brake light switch If only one has failed bulb or wiring to that fixture only
How to replace a power steering pump on a 97' GMC sierra 1500
I have a 1999 gmc 1500 sierra,need to replace door pins and bushings.door sagging.
left side of steering or brake pedal
you have to replace the whole module if I am not mistaken, first remove the steering wheel cover and then there should be 2 pins you will have to get to and push simultaneously to remove
If you clean the rotor up alittle you will see it STAMPED on the rotor. Look at it and you will find it. That will be factory specs. If your smart, you will REPLACE the rotors and pads and you will have done a good brake job.
bad brake light switch