You gain acess by removing the inside door panel and there will be little holes you can put a socket in to get on the nuts Do not tighten to tight because you will brake the plastic holding the metal screw then it will shake all the time.
how do i replace a heater core in a 2001 Chevrolet blazer
Depends upon what year the vehicle is. They all have a series of screws holding the lens/assembly in. 1982 and prior (K5 Blazer) are visible from the vehicle's exterior. 1982 through 2004 (S-10 style) have a series of screws on the inboard side of the assembly.
how do i tighten my side mirrors on my 98 blazer?
A vent window on a Blazer? Wow, it must be an old one. Need to know what year you have.
its in the tank witch has to be droped
Buy a Haynes Manual or similar OR take it to a mechanic :-)
Where is the fuel filter located on a 1990 chevrolet blazer?
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008f53e
The average cost to replace your 1997 Chevrolet Blazer water pump is $230. The water pump will cost approximately $80 and require two hours of labor.
There are 4 sensors on the 1995 Chevrolet Blazer. The 2 front for the Disc Brakes is behind the rotors on the hub. The inside hub has gears and the sensors are above them. On the rear, where you have Drum Brakes, the sensors are on the back of the Drum Brake Assembly, next to the bleeder screws.
Check related answers. There are several responses and are quite accurate.
Remove the dash assembly to gain access to the blend door actuator.