Dodge Intrepid
Subaru SVX
Timing Belts and Chains
Grand Am SE

How do you replace a timing belt on a 1992 Subaru SVX?

676869

Top Answer
User Avatar
Wiki User
Answered
2008-01-31 23:39:02
2008-01-31 23:39:02

Remove electric fans Remove timing belt covers Get belt from Subaru (don't use aftermarket belts) Line marks on belt up with marks on crank and cam pulleys Turn engine over by hand two rotations Make sure marks still line up Reassemble While you're in there, good idea to replace the cam and crank seals It's not an easy job, and is best left to a qualified certified Subaru techncian unless you are mechanically inclined (I'd recommend at least getting an owner's workshop manual before attempting it) For a more in-depth guide, see www.subaru-svx.net

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


On a 2.5 liter engine it is located behind the timing belt cover.My advise, replace the timing belt when you replace the timing belt. It will have to come off anyway.

HOW TO REPLACE A TIMING BELT ON A 1992 ACURA VIGOR? how do you change a timing belt on a 1992 acura vigor 2.5l how do you change a timing belt on a 1992 acura vigor 2.5l -------------------------------- See article at the Acura Vigor Club -- Related Links (below).

It will take an experience mechanic approximately 8 hours to replace the timing belt in your 1992 Chevy Corsica. The 1992 Chevy Corsica does not have each timing chain, it has a timing belt.

Subaru does use a timing belt. Please ask a question that can be answered.

The cam on this engine is driven by a CHAIN and not a belt. Therefore, It has no timing belt.

Subaru Forester has a timing belt.

Replace the belt every 60,000 miles. Warning: This is an interference engine.

My dealer told me the 2012 Forester 2.5 (non Turbo) has a timing CHAIN. No belt to replace.

The 2.5 litre four cylinder engine in a 2000 Subaru Forester has a timing BELT

Replacing the timing belt is a complicated procedure that is impossible to describe in this small space. The engine in your Subaru is an INTERFERENCE engine. As such if they belt is installed incorrectly and you start the engine you will do damage. I suggest you purchase Haynes or Chiltons repair manual for your car. It will describe in detail with photos how to replace the cam belt.

it has a timing belt not timing chain .. cheers

Remove the timing belt cover. There should be a pully that will ratched in and out to tighten and loosen the belt.

You don't "set" a timing belt. There is no adjustment, either it's right or it's not. You change a timing belt at whatever interval Subaru recommends for your Forester. --Ken

It has a timing belt that must be replaced every 105,000 miles.

I have a 1992 Camry LE and its a belt

The Maintenance Schedule requires Inspection (and replacement if necessary) of the Camshaft Drive Belt (aka Timing Belt) at every 30,000 miles and Replacement at 105,000 miles.

The grand am does not have a timing belt it has a timing chain.

The 2007 Subaru Tribeca does have dual timing chains.

I just got an estimate for my 02 wrx wagon at $904. bummed.

The transmission has nothing to do with your timing belt. If your vehicle is equipped with a 2.5l it has a timing belt. If you have a 3.0l it has timing chains. Cheers!

No, it has 2 timing chains.....


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.