Under the dashboard on the passenger side. Look in the engine compartment for the hoses that go from the engine through the firewall. Those are generally the heater hoses, which go to the heater core. Drain radiator first. Remove the two hoses that go though the fireware into the heater core. May have to remove a few other hoses and other things to get to them. They are supposed to be quick release connectors but might be a pain to remove. Should be abel to just squeeze the plastic tabs and pull the hoses off. Wasn't so easy for me. On the inside just above were the passanger's feet would be is a box. Remove the cover and drain pan. There is another cover on the side of the box. Remove that cover and the heater core is there. Should be able to just pull it out after removing the hoses. Read more: Where_is_the_heater_core_located_in_a_1994_FORD_E-150_ECONOLINE
How do I replace the heater core in a 1999 Ford e150 conversion van
How do i change the heater core on a 1997 ford e150
How do u find a heater control valve on a 96 Ford e150 4.9
Fairly difficult. They are easily replaced, but hard to get too.
Remove the water supply hoses from your 1987 Ford E1 50 heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
The alternator is weak or the belt is slipping.
i need a full picture view for the removal and instillation for a radiator for a 1989 ford e150 van 5.0 engine
Chilton's says to remove hoses from the 2 connectors inside engine compartment and remove the dash panel and lower panel. Then reach inside and pull the heater core out.
how to replace pcv valve on 2006 e150 ford van
gosh with ur hands
How do you replace a heater core in a 1998 ford expedition?"
need timing on 89 e 150 van