OPEN THE SWITCH BLADE KEY. LOOK IN THE SLOT VACATED BY THE key. THERE'S AN Indentation close to the center of the key's length. PRESS IN THIS Indentation and pullout the bottom part of the key. remove the circular key chain, and pry open the cover. change battery, and assemble in the reverse order.
You have to take it to a Mazda Dealership or locksmith.
One reason that your remote key will not unlock your Mazda 6 is that a fuse is blown. You may need to replace the batteries in the remote or reprogram the remote. A bad body control module is another reason the remote will not unlock the doors.
No, the only features on the 2006 Mazda 3 Keyless Entry Remote is Lock, Unlock, and Panic.
You need one of these: http://en.wikipedia.org/wiki/Amstrad_CPC_664
The battery is located in the trunk of the car, above the right rear wheelwell. You may need to pull back some of the carpeting. Once you find it, replace it just like any other car battery.
yes. your local Mazda dealer can program them for you. if they say it cant be done; theyre lieing to get you to pay for another key fob. the systems are the same the key fob may "look" different.
Call the dealership or Go to you local library and get the repair book, its free to use or a few cents to copy.
CR1620
mazda premacy
How do I re-program a remote for a 1997 mazda millinea?
This is how to program a Mazda protege keyless (also works with other Mazda models) remote system: 1. Open Drivers door and leave open. 2. Lock and unlock the drivers door using the power lock switch on door panel. (not sure if this is required) 3. Insert key into the ignition. 4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. ( i have seen others say 24 seconds for 4 & 5 combined) 5. Open and close drivers door 3 times ending with door in the open position. (you can depress the door switch instead) 6. Door locks should respond by locking and unlocking. 7. Press any button on remote 2 times. Doors should lock and unlock. 8. If programming a second remote press any button 2 times on it and door locks should cycle again. 9. Remove key from ignition and door locks will cycle again. 10. Test remotes. This information was received from: How do you program a keyless entry remote for your Mazda 5
originalkeyless.com they have the remote and the programming for Mazda 929's