Want this question answered?
Front seal: remove engine or transmission and replace the seal. Rear seal, remove the drive shaft to replace the seal. Unfortunately, you typically only have problems with the front seal.
Remove transmission and replace front seal.
The front seal on your automatic transmission would be between the torque converter and the front pump of the transmission. The transmission would have to be removed along with the torque converter to replace the seal.
yes , because the seal is behind the torque converter
Replace the front seal which is located by the spline.
Work needs to be performed. Also depends where it is leaking from. If pan is leaking just drain transmission fluid and install new pan gasket and refill transmission with fluid. If front seal leaking then you will have to pull transmission and replace front seal.
anywhere between $500 and $750.
It is between the torque converter and the front pump of the transmission. The transmission or engine has to be removed to gain access to the front transmission seal.
If it's the "front seal", meaning the seal on the input shaft, you'll have to separate the engine and trans. Pull one or both to get to the seal.
You will have to remove the transmission and torque converter from the car to get to the front seal.
The front seal of the tranny needs replaced, the tranny will have to come out to replace it.
You will need to replace the output shaft seal where the axle spline goes into the transmission. Easy to do and it is a very simple fix. This should fix the seal and stop any leaking.