Disconnect the battery and open the hood. Reach the headlight from the back and disconnect the two wires. Remove clips holding the assembly. Remove the assembly carefully and set it aside. Install the new one.
* Unplug the electrical connectors and remove the halagen bulbs * Remove the front combination (park and turn signal) light housing and the screws along the top of the front bumper cover * Remove the headlight housing mounting bolts and remove the housing
detach the bulbs and remove the clips behind the headlight assembly
for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan? for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
There is 2 large plastic screws that hold the headlight assembly`s in. Simply unscrew them and lift the headlight assemblies out then unhook take the bulbs out.
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
Open the hood of the engine compartment to your 1994 Toyota Corolla. Remove the wiring harness from the headlight. Remove the headlight retraining bolts from the headlight assembly. Reverse the process to install the new headlight.
I detail used cars at local dealerships and I have restored many Caravan headlight lenses. I use a product called Crystalenz, it works great and is really easy to use. You DO NOT have to replace the lenses. Check out their website www.crystalenz.com for more info. for removal, see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
I have the same problem. You can't seem to take it off from the outside. All I was told is that you have to unscrew it from the inside somehow.
you have to remove to entire headlight assembly 2 screws on top and 2 nuts on the backside of assembly that go through metal panel
REPLACE THE PASS SIDE HEADLIGHT
replace the headlight switch its wore out replace the headlight switch its wore out
Open the hood. You may need to make some extra room behind the headlight assembly. Grab the retaing ring and turn it. Then remove the head light but save the ring and unplug the wires. IMPORTANT NOTE: Do not touch the glass part of the new head light. How do you change the headlamp assembly on the passenger side of a 1994 Town and COuntry van, not the light bulb itself, the entire assembly?
You need to remove the side marker first. Remove the screw and pull hard perpendicular to the car to remove the side marker. Once that's removed you can see 2 screws on bottom of the headlight/foglight assembly and one screw on the top of the assembly as well as one nut on the side of the light assembly. Remove those screws and nut and you can pull out the whole headlight/foglight assembly. Remove the connector by pulling it straight out. Remove the rubber gasket and the spring lock. Assembly is the opposite.