unbolt lens, remove bulb socket quarter turn
how do you replace license pate light on 2006 pontia g6
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.
You need to remove the liner on the trunk lid. That will give you access to the license plate lights housing. Remove the sockets by twisting 1/4 turn and replace bulbs. Size for bulbs are 2825
194
how to replace the license plate bulb on a 2004 Honda cr-v
Open the hatchback and locate the trim plate inside the hatchback. Pry it off with a thin plastic tool such as a putty knife to gain access to the lamps.
It is one big peice that must be removed. If you open the trunk, look on the inside of the lid behind the license plate, and you will find a few nuts that once removed, will allow you to remove the entire rear facia panel that the license plate bolts to and which houses the "PONTIAC" lights.
how do you replace a honda crv licence plate bulb on a 2004
how do u change the license plate light on a 2005 sienna
you can see the plugs on the back of the light. lift the trunk and look past the license plate . the twist out . righty tighty lefty lousy . pull them out. its tight but they come out. use needle nose pliars, but be gentle.
Try dealer or E-Bay
Unscrew license plate and remove to expose light fixtures. Wedge light module away from holes. Replace them and return them to sockets.