Remove the lens backet set screw located at the top of the lens - this is done with the hood up. The backet connects the lens to the frame body. G-E-N-T-L-E-Y place a large screw driver between the headlight lens and the trun singal lens and slowly pry the signal lens forward. The lens is held in place by a 3 - 4 inch tube that connects by presure into the frame. You'll need to apply enough presure to dis-engage the tube. It will pop out giving you access to all the lights contained in the lens. It's easy to pop it back in - remember to replace the set screw under the hood.
On top in front of engine
wear gloves, bearings all come out. then you have to remove the sensor off the back of it. along with 6 17mm bolts. How do you change the rotors in the front on a 1998 Isuzu Trooper
The thermostat on a 1998 Isuzu Trooper is located on the front of the motor. It is in the top radiator hose where it connects to the motor. To access the thermostat, the hose needs to be disconnected from the motor.
passenger side of motor, top, in front of fire wall
The firing order for a 99 Isuzu Trooper 3.5l is 1, 2, 3, 4, 5, 6. The number one cylinder is on the left side in the front as you are facing the car.
you have two seats in the front, and a bench seat in the back
Cleaning will not help. The piston is going cocked in the bore. Rebuild or replace.
trouble putting right front signal bulb in.
How do you replace a front turn signal bulb for a 2000 sts cadillac?"
How do I remove the front shock bottle pin of my Isuzu rodeo 2000
Junk yard? E-Bay?
just behind the wheel well of the right front tire its a silver color looking thing