The 2000-2005 Chevrolet Impala only came with a 3.4 and 3.8 V6 (6 cylinder) engines. Are you sure that you don't have a Malibu instead?
at the emd of the upper rad hose you will find the thermostat housing. Take the 2 bolts out and remove it. When reinstalling it make sure the spring on the thermostat goes toward the engine.
weher thermostat locaked for impala 2001
The thermostat is located in the thermostat housing at the engine end of the top radiator hose.
It is at the engine end of the top radiator hose.The housing is the thermostat housing and the thermostat is located therein.
The thermostat is located in the housing and the engine end of the top radiator hose. Remove the 2 bolts and replace the thermostat.
On the 2006 Chevy Impala, the thermostat is located in the hose that is directly above the middle cylinder. It is on the driver's side of the engine compartment right behind the alternator. Look for a long hose that goes from the radiator to that location.
You can replace the thermostat on your 2010 Chevy Impala 3.5 by removing the water hose and the 3 bolts from the thermostat housing. The thermostat will come right out. Reverse the process to install the new thermostat.
deal with it buddy
were is the oil filter located on a 1960 Chevrolet impala 6 cylinder engine located
The engine thermostat, on a 2008 Chevy Impala 3.5 V6, is located on the lower front side of the engine. The thermostat will have a water hose going into the top of it.
Partially drain the radiator down . Remove the upper radiator hose at the engine end. The housing is where the thermostat is located. Remove the two bolts and clean Both surfaces. Install the new thermostat.
It is located at the engine end of the top radiator hose.
The thermostat is located in the housing at the engine end of the top radiator hose.
It is located on the intake manifold near the thermostat housing.
The thermostat is located in the housing where the upper radiator hose connects to the engine.Remove the 2 bolts and remove the thermostat.
Underneathe the thermostat housing (3.8 engine)
it is located under the throttlebody just follow the upper radiator hose
It is in the thermostat housing at the end of the top radiator hose on the engine side.
If you do it yourself, it's a 15 minute job and a thermostat and gasket won't run more than $10.
there is no such thing as a 1999 impala
In the master break cylinder
It is located in the intake manifold near the thermostat housing.
Drain the radiator into a container. Remove the upper radiator hose at the engine and remove the 2 bolts in the thermostat housing. Remove the thermostat and clean the surfaces. Install the new thermostat ,upper radiator hose and refill the radiator.
Drain the radiator down into a container and remove the top radiator hose from the engine. Remove the 2 bolts on the housing and remove it and the thermostat. Clean both surfaces and install the new thermostat.
Usually at the engine end of the upper radiator hose in a bolt on type housing