My left signal light went two days ago. This is what I had to do. Pull the carpet down Remove all the screws that hold the tail light on You will probably need pliers or a wrench to get out the bulb holder Auto Zone helped me and it used a 3157 sylvania bulb when the manual said to find a 3357. I guess they are interchangeable. Good luck.
== ==
In most cases you will need to replace the turn signal switch on the steering wheel for your 1983 Chevy Caprice Classic rather than fixing it. To replace it, remove the horn pad and then use a steering wheel puller and compressor to remove the steering column. You will then remove the signal along with the wiring harness and bus fuses. Replace the signal and wiring and then replace the steering column itself.
grip it firmly and pull it straight out,new one pushes back in.
American Hot Rod - 2004 '54 Corvette and '55 Chevy Part 2 4-2 was released on: USA: 2006
Just had my turn signal switch replaced, for the second time, on my '98 Chevy Lumina. I paid $260 to a fairly trustworthy auto repair mechanic
Your blinker is bad, it is located under the center of the dash, get to it by taking the driverside lower panel off. There are two one for the turn signals and one for four ways. Blinkers are not that expensive, i got mine at ace hardware
how do you replace side marker light on 2008 chevy trailblazer
== ==
== ==
== ==
== ==
== ==
== ==
== ==
How do you replace a turn signal bulb in a 1998 cavalier
On a 1999 C5 corvette manually put the flip up headlight in the up position, remove the plastic headlight trim around the headlight with three screws... put your bare arm under the raised headlight and remove the turn signal bulb with a careful twist.
Begin by removing the wiring harness from your 1996 Chevy Corvette horn. Remove the horn retaining bolts. Reverse the process to install the new horn.
194 For side marker/front, 1157 for front and rear signal/park lights