# Disconnect negative battery cable # Place protective covers on each fender # Drain the cooling system # If equipped with an air pump it as follows: Loosen thermactor pump adjusting bolt and remove belt.Remove thermactor pump hose clamp located below the thermactor pump # Remove the thermactor pump bracket bolts # Remove thermactor pump and bracket as an assembly # Loosen the water pump idler pulley and remove the belt from the water pump pulley # Disconnect the heater hose at the water pump or the water pump inlet tube.Disconnect the water pump inlet tube if equipped # Clean any old gasket material that may remain on the engine surface
1994 mercury topaz 4cyl
A 1991 mercury topaz has drum brakes on the rear wheels.
Your 1991 Mercury Topaz 2.3 liter has a timing CHAIN
According to my Chilton's Auto Repair Manual : For a 1991 Mercury Topaz ( front wheel drive ) ( 15.9 US. gallons )
According to my Chilton's Auto Repair manual : For a 1991 Mercury Topaz ( front wheel drive ) ( 15.9 US. gallons )
1-3-4-2
The fuse block should be located to the left of the steering column, under the dash. Depending on which Mercury GS you have (sable, topaz, etc.) it should be a relay located in the fuse block.
More or less, YES
you could use a turkey baster
The spark plug wires fire in the 1, 3, 4, 2 order on the 1991 Mercury Topaz GS 2.3 engine. This is the most common engine type for this vehicle.Ê
Try MOTORLIT.COM for an owners manual.
Remove belt If you are just changing the wheel--it is "left handed thread"