Auto Parts and Repairs
Windshields and Wipers
Ford Expedition XLT
DIY Projects

How do you replace the windshield wiper arm on a 1993 Ford Escort?

495051

Top Answer
User Avatar
Wiki User
2008-01-11 01:05:29
2008-01-11 01:05:29

Pull the rubber cap off of the arm where it meets the car, near the bottom of the windshield. Next get an appropriate sized socket wrench to fit the nut that is under the rubber cap. Take the nut off. Take old wiper arm off and replace with new one. Repeat above steps in reverse order.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

The windshield wiper relay is under the dash on the drivers side of the passenger compartment.

User Avatar

The 1991-2002 Ford Escort takes 20" drivers side and 18" passenger side replacement windshield wiper blades on the front and if applicable, a 14" rear wiper blade.

User Avatar

The 1993 Pontiac Transport windshield wiper control module is located on the firewall in the engine compartment. The windshield wiper control module will be on the passenger side of the firewall.

User Avatar

The 1993 Mercury Villager takes 22" replacement windshield wiper blades on both sides front.

User Avatar

This vehicle has hook wiper arms. Find little tab on wiper blade where its inserted into the hook. Press tab and pull wiper out of hook. You may need to rotate blade to make clearance. Sometimes you have to flex the blade a little to in order to make enough room. See video for hook arms on the related link below.

User Avatar

The 1993 Geo windshield wiper fuse can be found in the fuse box. The exact location of the windshield wiper fuse will be listed on the inside cover of the fuse box.

User Avatar

top of the fire wall under the hood your wiper arms will connect

User Avatar

First, remove the windshield wipers. Then you can remove the cowel just in front of the windshield. There are a bunch of screws connecting it to the firewall. Once you remove this, close the hood. Now everything is easily accessible and the rest is intuitive. Replace everything by using the opposite procedure.

User Avatar

# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor

User Avatar

The 1993 Jeep Grand Cherokee takes 20" replacement windshield wiper blades on both sides front and an 11" or 12" rear wiper blade.

User Avatar

The 1993-2001 Toyota Corolla takes 20" driver side and 18" passenger side replacement windshield wiper blades on the front.

User Avatar

The 1987-1993 Dodge Caravan/Grand Caravan takes 18" replacement windshield wiper blades on both sides front. 1987-1990 takes a 16" rear wiper and 1991-1993 takes an 18" rear wiper.

User Avatar

The most common cause that windshield wipers stop working is a blown fuse. The windshield wiper motor may need to be changed is also common.

User Avatar

The windshield wiper fuse on a 1993 Jeep Cherokee is located in the fuse box that is located in the engine compartment. Disconnect battery before servicing the fuses in this fuse box on top of the battery.

User Avatar

The 1990-1993 Honda Accord takes 24" driver side, 19" passenger side and 17" rear replacement windshield wiper blades.

User Avatar

Yes, you can use a windshield from a 1993 and up Camaro for your 2001 Camaro.

User Avatar

On most vehicles, just retract the clip & pull straight up.

User Avatar

The 1993 Mercury Sable takes 20" replacement windshield wiper blades on both sides front (and a 14" rear wiper blade if applicable). See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.

User Avatar

They are both located under the plastic wiper cowl in the area between the hood and windshield. Remove the wipers (if you aren't sure how to do that you pull the tabs about 3/4 of the way out) then you remove the screws in the wiper cowl. Once it is removed you should see both the wiper motor and control bar.

User Avatar

Need to replace fuses on 1993 Grand Prix. Need to know ampere and color of the fuses.

User Avatar

Remove the wiring harness from the back of your 1993 Mercury Villager windshield washer motor pump. Remove the windshield washer pump hoses. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer motor pump.

User Avatar

The 1993-2001 Toyota Corollas take 20" driver side and 18" passenger side replacement windshield wiper blades.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.