Turn key on ( Do not start ) Then push the gas pedal all the way down to the floor 3 times and then turn the key off. And then start the engine and give it a few seconds and it should go out.
You can either bring it in to a Chevy dealer or use a programmer/tuner to reset the check engine light.
no
It tells you in the manual, but if i remember correctly you turn the key but dont start the truck. then push the gas pedal to the floor 3 times and it will chime if it reset.
With engine off. Turn key to on. Press accelerator fully three times. This should reset light.
How do I reset the service engine light on a 2003 Chevy Trailblazer?
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
How do you reset check engine light for the 2009 Chevy trail blazer?
When you take your car in for an oil change, have the technicians there do the reset for you. (they should automatically do that for you, but you may have to ask them....to make sure they do it) Valvoline does it as part of their service.
Turn the key to the 'on' position (do not start the truck).Wait for the change oil light to come on.Tap the gas pedal 5 times.Move key to off position, move key back to on position. The change oil light should be reset.
Reset the change oil light on Mazda 3
turn the key to the on position engine not running step on gas pedal to the floor three times and wait for light to flash and go out and its reset
Your owners manual should tell you how to reset the light.