Remove the negative battery terminal (-) for about 15 minutes and most codes will reset.
the 1989 Honda accord lxi has a brake lamp light on the dashboard, if the brake lamp light is on, this means you have a brake/tail light out or disconnected
Blown lamp or fuse. Poor connection. Switch not working. Break in circuit
It means the light bulb(s) on the rear break lights have gone out and your rear break lights do not come on when you depress the brake pedal. Just replace both rear break lights and the sensor will go off. This happened on my 2002 Honda Accord.
One of the problems could be the alternator is undercharging . The other issue could be the computer nay need reset.
just had oil change on saturday. no problems. now brake lamp light on 2000 honda accord ex
On a 1994 Honda Accord, the brake lamp comes on when a tail light is no longer working. The burned-out bulb needs to be replaced. The brake lamp will not come on after the bulb is replaced.
To reset the oil change lamp on a 2007 Town and Country, locate the reset button on the instrument panel. Hold the button down for 5 seconds.
Here, this will probably help: http://handa-accessories.com/accord/03-2drfoglight.pdf
The SRI lamp may only be reset with the use of a DRBII scan tool, or equivalent. If this is not available, you will have to take the vehicle to a properly equipped shop for them to reset the lamp.
The Spongebob Squarepants School Study Lamp is a study lamp made of metal that will not break if the kids get feisty!
fuesed breaklamp replace bulb.
Adjustment need to be backed off by the brake pedal!
on the pink lamp
replace the burnt out bulb
To reset your malfunction indicator lamp start your car then you hire fps russia to blow up your piece of terrible car and buy a new one simple actually.feces
it is an indicator. You need to check your brake fluid or your bulb.
My 1992 Honda Accord Brake Lamp came on several times after I had the Master Cylinder replaced. Turns out the fluid had gotten low. Once I refilled the fluid level, the light stopped coming on.
The lamp is a piece of equipment that is built into your LCD TV. This lamp is what brightens the screen on the television. The bulbs for this lamp can break and need to be replaced.
Black Lamp - video game - was created in 1988.
exhaust recirculation system
The easiest way to reset the timing belt indicator lamp in your Toyota automobile is to remove the fuse for the indicator lamp. Keep the fuse out for approximately 30 seconds. Put the fuse back in and the indicator light should be off.
tke a screwdriver and remove the screws and take out the tail lamp. otherewise take a hammer and break the tail lamp
There is no reset for taillamp failure relay. If there is a fault the message will continue to be displayed www.lextechautomotivellc.com