Just remove the Battery for 15 sec. (+) then it is reset already, Rizal
How can you reset an ECU on a Kia Sedona
There is no ECU reset button.
you push the reset button on the back of the ECU.
press the reset button nope, that does not do it. whoever gave that answer (press reset button) must be joking. the proper procedure iswith engine shut offyou then proceed to disconnect the battery andleaveitdisconnected for a few minutes (15 minutes should be enough). this will erase the "driver profile" in the ecu. then reconnect the battery, start theengine, turn on the a/c AND let it idle for about 20-30 minutes. this idle time is very important since it allows the ecu to reacquire the engine parameters it needs.if you don't let it idle for at least20 minutes then you'll see your mileage go down and it may not shift right (for those with a/t). also be sure to keepthe transmissionin park or neutral so as not to interfere with the ecu resetting itself. don't press the brake or accelerator pedals either.
To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
Behind the right hand fascia.
Depend the number of the ecu and year of the car, general you can reset it, just recoded. The other option is, change the ecu and reset the ews and then you can redode the imobilizer with software machine. www.autocentralinas.com
Have the ECU scanned with an OBD2 scan tool and then repair the problem. You can then try to reset the ECU by removing the negative battery cable for 5 minutes which may or may not reset the ECU. If it does not, it will have to be reset with the scan tool.
The engine computer is the voltage regulator.
how do i reset the computer on my hyundai xg300
It is built into the ECU.
in the front of car, its a green box in the relai box Salu2 Max