0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you remove a engine in a 1988 Lincoln mark v11?
take the hood off, un bolt it from the transmission, remove any wires hoses etc, and lift it out, its not a rice burner or front wheel drive, the hardest part is bellhousing bolts and exhaust manifold bolts
When changing the fuel pump on a 1993 Lincoln Mark 8 will you have to take off the exhaust system and the drive shaft?
no all you have to take down is the exhaust and the gas tank the drive shaft is above the gas tank
Do you have to replace gaskets when you take the exhaust manifold off?
Good idea to do so
How many hours it take to change manifold gasket in cutlaas car?
The year, engine size and if it is the intake manifold or an exhaust manifold gaskets would help.
Smoke coming out from front of intake manifold on 1990 F150 truck?
If you aren't hearing a lot of exhaust noise and you're just getting smoke, you have either an oil leak or antifreeze leak that is getting on the exhaust manifold. If you're getting oil on the manifold you have a fire hazard and should take care of the problem immediately. If you hear exhaust gas leaking around the manifold you need to replace the gasket or possibly the manifold is cracked and you need to replace the manifold.
Where is the oil sending unit on a 2000 Vitara and how do you change it?
Its on the drivers side of the motor behind the exhaust manifold. Take the manifold cover off and you will be able to see it between the 3rd and 4th exhaust pipes on the side of the motor.
How do you replace a exhaust manifold on a 1990 Nissan Pathfinder?
you jack the car up, whatever side exhaust manifold u take off that side of tire u remove the heat shield and unbolt that manifold. u take off that tire because u have to get those hard to reach areas , and you might need to take off the exhaust from under the car it takes about 20 min if u know what your doing, but its pretty simple
How do you take of intake manifold on a 1990 Lincoln mark 7?
To remove the upper intake :Remove the H.O. 5.0 plate. The screws are torx head . Remove the bolts underneath. Lower is pretty self explanatory Hope this helps Mark VII Heaven.
Where is the PVC valve located on a 1997 Ford Contour?
Its Located be hide the Exhaust manifold, You have to take off the Cat, to get to it
What must be removed to get to 97 GMC Sonoma 4 cylinder starter?
You Must take the exhaust off at the manifold.
What happens to a 2001 Mercury Sable when the Manifold Gasket is unsealed?
If it is the intake manifold, there will be vacuum leaks, backfire, and poor performance. If it is the exhaust manifold, you will have loud exhaust noise which may warrant a citation - also, emissions control laws will be violated. Take the manifold ro a shop where it can be re-surfaced or try to find a product at your local auto parts store that will help seal the manifold. - Good luck.
Why should you have to replace your exhaust manifold gasket?
You have to replace the gasket because when you take the manifold off it brakes the seel and air will be sucked into the manifold and your vehicle will hardly run, and you wont be able to drive it You have to replace the gasket because when you take the manifold off it brakes the seel and air will be sucked into the manifold and your vehicle will hardly run, and you wont be able to drive it
