open up the armrest/compartment. pry open the little door at the bottom of that. unscrew the screws there. take out your cup holders in the center and remove those screws. remove that section. remove the screws holding the center console/section around your shifter. you should figure it out from there.
yes, your lug pattern size is 4x114.3 for 94-97 Accords. All models.
No, the only transmission that fits exactly is a 94-97 Accord. The 90-93 Accord can be used, but you will need the 90-93 flywheel. Chuck
R134 (Source: '94 Accord Manual)
How to replace a timing belt on Honda accord 94
The 94 Accord EX (SEDAN OR COUPE) has a 2.2 SOHC 145HP V-TEC.
In the valve cover
my transmission has a code 154 what is it 94 honda aacord
In the back of the Throttle Body right side for 94 accord DX.
Not 100% but it should fit yes the accord 5 gen was from 94-97
Engine diagrams for a 1994 Honda Accord are available through automotive parts stores. Honda Accord service repair manuals also carry all the necessary diagrams.
Replace then with new ones.
Is this a serious question? Do you mean where to buy them?
Honda does not equip their vehicles with an inertia switch.
NOPE, THEY BOLT ON DIFFERENT AND THEY ARE BOTH TOTALLY DIFFERENT.
I have a 94 accord and the horn is located on the steering wheel.
directly under the distributor
It is under the carpet where you rest your feet on the passenger side
ZF-1 transaxle fluid
The vehicle will not work.
The crank angle sensor is located in the distributor.only in the 94 and 95 Honda accord.