Want this question answered?
At the base of the wiper arm is a small "pin" sticking out. Pull this pin outward to release the entire wiper arm. Reinstall by pushing the pin in.
http://www.ehow.com/video_4936070_install-windshield-wiper-motor.html?pid=1&cp=1 HERE IS WEBSITE WITH VIDEO ON HOW TO REMOVE AND REPLACE WIPER MOTOR
* Pry off the cover for the wiper arm nuts unscrew the nuts and remove both wiper arms * disconnect the windshield washer line remove the single retaining screw release the five push-in retainers and remove the cowl cover * Unplug the electrical connector from the windshield wiper motor * Remove the three wiper motor assembly retaining bolts and remove the wiper motor assembly * Detach the wiper transmission assembly from the wiper motor crank arm * Detach the wiper motor crank arm from the wiper motor assembly * Remove the three wiper motor retaining screws and detach the wiper motor from bracket
Remove plastic cap. Remove nut. Pry up wiper arm.....
are you serious... life blade off windshield, unclip plastic fastener off the center of the wiper arm, remove wiper, replace in reverse order.
Remove the wiper arm retaining clip. The retaining clip will be just below the wiper arm connection. Hold the retaining clip in and the wiper arm will come off.
A wiper arm on a 2001 Honda Civic is screwed on. To remove it unscrew the mounting hardware and take off the wiper arm.
you just pick up the wiper arm
# Raise the rear wiper arm finish cap to expose the wiper arm nut. # Remove the rear wiper arm nut (1). # Lift the rear wiper arm assembly (2) away from the rear window and remove the wiper arm from the pivot shaft. The cap tilts up toward the arm
To remove the spring loaded wiper arm you have to first of all to unscrew the screws. After the screws have been removed, the spring loaded wiper arm can then be removed.
The 1995 Chevrolet Caprice takes 22" wiper blades on both sides front and a 16" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
look at the half circle clip on the side of wiper arm. lift the wiper arm and pull the clip out as far as it goes the wiper arm should rest on the clip and now be "locked" up in the air . now you should be able to remove the wiper arm