it will fall right inYou will have to modify the exhaust to match the manifolds, and if you do not use the electrical harness from your 302, you need to make sure to swap the engine computer. The 352 does not use a pressure sensor on the Power Steering pump and will cause the check engine light to come on. You can splice the connector from the 302 harness into the vehicle wiring, the 351 harness does not have the pins on it's side of the harness.
yes they are basicly the same truck
The maximum towing capacity for this 1991 Ford F-150 is 8,100 pounds. This is for the 5.0 Liter V8 engine.
CAPACITIESEngine, with Wix # 51515 Filter..........6.0 quartsHope This Helps.
The EGR valve on a 1979 F150 with a 302 is located in the center of the engine. It is close to the firewall.
1986 f150 emisson light on is their restn set
Motorcraft FL-1-A engine oil filter ( for the 300 straight six , 302 and 351 V8 )
No the 390 is a big block the 302 is a small block.
i got an 85 f150 with the 302 and i have 140 to 145 horse
yes basicaly all f150s 80 - 96 are the same types of trucks yes basicaly all f150s 80 - 96 are the same types of trucks
yeah if u no how to do it
There is an alternate firing order for a 302 HO engine. Standard Ford 302 firing order is 1-5-4-2-6-3-7-8, HO versionis 1-3-7-2-6-5-4-8
10 degrees BTDC with EFI
Yes. Mine did anyways.
Its located in front of the oilfilter on left side of engine
www . motorcraft . com ( no spaces ) shows 10 degrees BTDC for the 5.0 L ( 302 cubic inch ) WITH ELECTRONIC FUEL INJECTION
It would be a 289
.054 inch , according to fordparts.com
some do . some don't
the firing order 18436572 on the 1988 f150 302
why does my 1984 ford f150 302 v8 cut out while moving