Took me about an hour to change mine, but it was the first time.
depending on the year, I have a 2002 intrigue, it is located just above the starter, it needs to be removed to remove the crankshaft sensor, 15mm for starter and 10mm for sensor 1 bolt , not to difficult.
The engine won't start.
The crankshaft sensor is in the front of the engine.Above the starter.You will have to drop the starter.2 15mm bolts.Look up and there it will be.
How do you change the crank sensor on a 2002Nissan Atima3.5?
Someone believes you should, "Take Your coolant tank off and the sensor is located under it. It's fairlly simple to replace once you find it."; You will find a sensor there but not the crankshaft sensor. On a 99 Intrigue with a 3.5L, the crankshaft position sensor is in the engine block just above and behind the starter. get under the car, remove the starter and you should find what you are looking for.
The crankshaft position sensor is near the front of the motor behind the starter. you need to remove the starter to change it. Here is a picture for the 3.5L : http://im1.shutterfly.com/media/47a0df00b3127ccef97e38181be400000030O08IZtXLZszag9vPhI/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/
Right next to and somewhat behind the crankshaft pulley
where is crankshaft position sensor and camshaft position sensor on a 2004 Jetta 2.0 gl
how do you change a crankshaft position sensor on a 1999 chevy camaro z28?
the position off the crankshaft sensor
Yes there is a crankshaft sensor
I have Olds Intrigue 2000 3.5L. Needed to replace faulty crankshaft sensor.3.5L engine has two of them. If engine is hard to start cold or hot and engine light is OK.Very common problem for this engine in Aurora 3.5 and Intrigue 3.5 is crankshaft position sensor. Which is located above and behind starter. Starter must be removed first.------------------------------------------------------------------------------------------------------------AnswerLower right hand side of the engine just above the oil pan. Theres a single bolt that holds it in.