you have eight main bolts. 10
You will need to pull the transmission out or the engine out, which ever is the easiest for you. It has a solid round rear main seal that goes over the back of the crankshaft were the fly-wheel bolts to it.
under the hood in the power distribution box, maxi-fuses. gm Jim
There are many different features of a 2002 Chevrolet Silverado. Some of these features include a V-6 engine, chrome bumpers, an engine hour meter, and front and rear ventilated disc brakes.
thirty five thousandths.i believe but you can always call a parts store and ask them.
There will be 6 main bolts (some may have more bolts or less) on the top of the bed. Remove all bolts. After, check for the wiring connections. There should be a releasable wiring harness up towards the cab, unplug the wiring. If you have a towing pkg you will need to disconnect the wiring from that also.
If you are talking about torquing down the main bearing caps, the two inner bolts are the ones closest to the center of the cap, and the outers are furthest away.
most Chevy trannys made for small blocks will bolt some additional information .... Chevy never made a 305 with a 4 bold main only 2 bolt main
Remove the transmission and starter. Unbolt the flexplate from the crank. While you're at it, replace the rear main seal. Replace the flexplate and torque bolts to manufacturer's specs.
it was the lightning bolts
NO
Winston Smith is the main character of 1984. -That should be listed as an FAQ.
Main manufacturing centers in Venezuela are:Caracas (Chevrolet Silverado, Hyundai Getz / Click / TB, GMC Sierra)Valencia (Jeep Liberty and Grand Cherokee, Ford Super Duty and F-Series)Maracay (Venirauto Centauro and Turpial)